Gear guide
Best Heat Gun for a Scorch Marker: Wattage and Picks
Updated Picked from Amazon listings, not hands-on tests. How we pick
A scorch marker, wood burning marker pen or wood burning gel does nothing until it is heated, and a hair dryer is not hot enough. Scorch Marker gives two figures: the reaction needs about 350 F, and the heat gun should be at least 1500 W and preheated. Wattage matters more than the top temperature printed on the box. A 300 to 400 W mini or embossing heat gun can list a nozzle temperature well above 350 F, but it moves far less air (100 to 200 L/min on the mini gun here, against 250 to 500 L/min on the full-size ones that state it), so it warms a small patch at a time and a sign takes much longer to darken. This guide compares five full-size heat guns of 1500 to 1800 W and two mini craft heat guns by the wattage, heat settings and nozzles their listings state. Nothing was tested. Heat in a well-ventilated area, wear eye protection, never touch the nozzle, and keep the gun moving so the bare wood around the design does not scorch.
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Top picks at a glance
Compare all picksClosest match for the job
ROMECH 1500 W heat gun, variable 120 to 1200 F
Rated 1500 W, the minimum the marker's maker names, with heat that the listing says peaks in 1.5 seconds.
See price on AmazonSee it on AmazonMost for the money on paper
SEEKONE 1800 W heat gun, 752 F and 1112 F
The listing states 1800 W with two modes: I at 752 F and 250 L/min, II at 1112 F and 500 L/min.
See price on AmazonSee it on AmazonMost complete listing
Shop-Vac 1500 W heat gun, 570 F and 1020 F
Select 570 F with 300 L/min airflow or 1020 F with 500 L/min, per the spec sheet; power is stated as 1500 W.
See price on AmazonSee it on Amazon
Compare the picks
- ROMECH 1500 W heat gun, variable 120 to 1200 F
- Power
- 1500 W
- Heat settings
- Variable, 120 to 1200 F
- Nozzles
- 4 included
- SEEKONE 1800 W heat gun, 752 F and 1112 F
- Power
- 1800 W
- Heat settings
- 752 F and 1112 F
- Nozzles
- not stated
- Shop-Vac 1500 W heat gun, 570 F and 1020 F
- Power
- 1500 W
- Heat settings
- 570 F and 1020 F
- Nozzles
- 4 included
- PRULDE N2190 1500 W heat gun, 572 F and 1112 F
- Power
- 1500 W
- Heat settings
- 572 F and 1112 F
- Nozzles
- 4 included
- CRAFTSMAN CMEE531 1500 W heat gun, 120 to 1200 F
- Power
- 1500 W
- Heat settings
- Variable, 120 to 1200 F
- Nozzles
- not stated
- Chandler Tool mini dual temp craft heat gun
- Power
- not stated
- Heat settings
- 2: low and high
- Nozzles
- Shield, no nozzles named
| Pick | Power | Heat settings | Nozzles | Price | Link |
|---|---|---|---|---|---|
| ROMECH 1500 W heat gun, variable 120 to 1200 F | 1500 W | Variable, 120 to 1200 F | 4 included | - | Amazon |
| SEEKONE 1800 W heat gun, 752 F and 1112 F | 1800 W | 752 F and 1112 F | not stated | - | Amazon |
| Shop-Vac 1500 W heat gun, 570 F and 1020 F | 1500 W | 570 F and 1020 F | 4 included | - | Amazon |
| PRULDE N2190 1500 W heat gun, 572 F and 1112 F | 1500 W | 572 F and 1112 F | 4 included | - | Amazon |
| CRAFTSMAN CMEE531 1500 W heat gun, 120 to 1200 F | 1500 W | Variable, 120 to 1200 F | not stated | - | Amazon |
| Chandler Tool mini dual temp craft heat gun | not stated | 2: low and high | Shield, no nozzles named | - | Amazon |
Facts are taken from each Amazon listing. Prices are checked daily and shown with their date.
The picks in detail
Pick 1 · ROMECH
ROMECH 1500 W heat gun, variable 120 to 1200 F
See price on AmazonA 1500 W heat gun with variable temperature from 120 F to 1200 F, two airflow levels and four nozzles. The variable control suits someone who wants to raise the heat step by step until the marker lines darken.
What the listing offers
- Rated 1500 W, the minimum the marker's maker names, with heat that the listing says peaks in 1.5 seconds.
- Variable temperature from 120 F to 1200 F with two airflow levels, according to the title.
- Comes with 4 nozzles, stands upright by itself for hands-free use and has overload protection, per the product page.
Limits to know
- A full-size gun that the spec sheet also aims at paint stripping and bending PVC pipe: larger than a craft heat tool for small ornaments.
- Only the power cord is described as UL certified; the manufacturer does not state certification for the whole tool.
Pick 2 · SEEKONE
SEEKONE 1800 W heat gun, 752 F and 1112 F
See price on AmazonA full-size 1800 W heat gun with two fixed modes: 752 F at 250 L/min and 1112 F at 500 L/min. The rating is above the 1500 W the marker's maker asks for, so it suits signs and larger wood burning gel stencils.
What the listing offers
- The listing states 1800 W with two modes: I at 752 F and 250 L/min, II at 1112 F and 500 L/min.
- Described as UL certified, with built-in overheat protection that shuts the heating element down.
- A built-in stand lets it sit upright on a bench, and the handle is wrapped in TPE rubber, per the product page.
Limits to know
- Only two fixed heat modes, with no dial to set a temperature between 752 F and 1112 F.
- The title names no included nozzles, and the listing warns of smoke and a burning odor on first use.
Pick 3 · Shop-Vac
Shop-Vac 1500 W heat gun, 570 F and 1020 F
See price on AmazonA 1500 W two-temperature heat gun: 570 F with 300 L/min airflow or 1020 F with 500 L/min. The listing names its four nozzles, including a reducer nozzle for a narrower stream of air on smaller designs.
What the listing offers
- Select 570 F with 300 L/min airflow or 1020 F with 500 L/min, per the spec sheet; power is stated as 1500 W.
- The 4 nozzles are named on the product page: air-blaster, scraper, deflector and reducer.
- On overheating the heater shuts off while the blower keeps running, and the gun stands upright on a 6.6 ft cord.
Limits to know
- Two fixed temperatures only, with no dial for settings in between.
- The manufacturer does not mention UL or any other safety certification, and it gives no weight.
Pick 4 · NEU MASTER
PRULDE N2190 1500 W heat gun, 572 F and 1112 F
See price on AmazonA 1500 W heat gun with two temperature settings, 572 F and 1112 F, paired with airflow of 300 and 500 L/min, plus four nozzles and a 6.5 ft cord. A fixed two-step gun for scorch marker and gel work at a bench.
What the listing offers
- Two settings are stated: 572 F with 300 L/min airflow and 1112 F with 500 L/min.
- The listing gives 1500 W and says the gun reaches its maximum temperature within 1.5 seconds.
- Includes 4 nozzle attachments, a 6.5 ft cord with a UL certified plug, a back support for standing and overload protection.
Limits to know
- The title says PRULDE while the brand field says NEU MASTER, so it is unclear who makes the tool.
- Two fixed steps only, with nothing between 572 F and 1112 F, and only the plug is described as UL certified.
Pick 5 · CRAFTSMAN
CRAFTSMAN CMEE531 1500 W heat gun, 120 to 1200 F
See price on AmazonA corded 1500 W heat gun from a known tool brand with a dial from 120 F to 1200 F and two fan speeds. It suits a buyer who wants a named model number and a short, plain spec list.
What the listing offers
- A variable temperature control dial adjusts heat from 120 F to 1200 F, as the listing states.
- Rated 1500 watts with two fan speeds, matching the wattage the marker's maker asks for.
- An integrated support stand lets the heat gun sit upright, and the cord is 6 ft.
Limits to know
- The spec sheet names no nozzles or accessories, so a narrower nozzle for small designs may be a separate purchase.
- Five short bullets only: weight, overheat protection and certification are not mentioned.
Pick 6 · Chandler Tool
Chandler Tool mini dual temp craft heat gun
See price on AmazonA compact craft heat gun with two heat and speed settings, a shield and a wire stand. Its listing is the only one here that names a scorch marker for wood burning, but it gives no wattage and no temperatures.
What the listing offers
- The listing names the job directly: it says to pair the gun with a scorch marker for wood burning.
- Dual temperature and speed settings: low for delicate or detail work, high for heavy duty or high volume work.
- Described as insulated, light weight and low-noise, UL certified, with a shield and a wire stand.
Limits to know
- No wattage and no temperatures are stated, so it cannot be checked against the 1500 W the marker's maker asks for.
- No nozzles are named, and the bullets give no cord length or weight.
Read before you buy
- Wood Burning Without a Wood Burning Tool: Gel, Marker and Other MethodsFour ways to get a burned design without a wood burning pen: gel, scorch marker, soldering iron and torch, compared by what you need, control and risk.
- Wood Burning With a Cricut: Stencil, Burning Gel and Heat GunSteps for a burned-look sign with a Cricut: cut a vinyl stencil, apply burning gel or scorch marker thin, peel, then heat with a 1500 W heat gun.
- What Is Wood Burning Paste and Gel Made Of, and How Does It Work?What wood burning paste and gel are, what makers publish about the contents, how heat of about 350 F darkens the wood, and the stencil steps with a heat gun.
- Scorch Marker vs Wood Burning Pen: Results, Cost and ControlScorch marker vs wood burning pen, row by row: what you buy, line control, shading, bleed, speed and fumes, with the 350 F and 1500 W heat gun figures.
More gear for the marker and gel stage
Burn and Grain chooses every product independently from what its Amazon listing states. We may earn a commission from the links above. As an Amazon Associate I earn from qualifying purchases.