Pyrography Supplies: A Complete List for Wood Burning

Published

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

Gear for this job

All 7 picks compared

The pyrography supplies you need to start are a wood burner with a few tips, pale wood blanks, sandpaper, graphite transfer paper, pliers for hot tips and ventilation; together they cost about 40 to 70 dollars. Everything else, from smoke extractors to wire-nib stations and coloring media, can wait until you know what kind of work you enjoy. Below is the full list in three tiers, with what to look for in each item.

Essentials: the burner and tips

Start with either a solid-point pen with a temperature dial (about 15 to 40 dollars, usually sold with 10 to 30 brass tips) or a budget wire-nib station (about 50 to 100 dollars). The solid-point kit handles lettering, signs and simple patterns. The wire-nib station is better for fine lines and shading and is what most people move to within a year.

Of all the tips in a kit you will use three most: a universal or cone tip for lines, a flat shader for tone, and a small ball or writing tip for lettering. Stamp tips are fun but optional. A temperature dial matters more than wattage, because without one you control tone only by speed.

Compare beginner kits →

Essentials: wood and surface prep

Buy basswood for most projects: rounds, plaques and planks are sold pre-cut and pre-sanded. Birch plywood is a cheaper alternative for practice. Get a few sheets of 150 and 220 grit sandpaper and a sanding block; sanding to 220 lets the tip glide and gives even tone.

Keep scraps of every wood you burn. A test strip of tones at different heat settings on the same wood saves the actual project from guesswork, and it is the single habit that improves results fastest.

See wood blanks for pyrography →

Essentials: transfer, safety and cleanup

Wax-free graphite transfer paper and a ballpoint pen for tracing designs, plus a white plastic eraser for leftover lines. Needle-nose pliers to change hot tips; never use fingers even when the tip looks cool. A heat-resistant stand comes with most pens; use it every time the pen leaves your hand.

Smoke from wood is an irritant, so work near an open window with a small fan blowing smoke away from you at minimum. For tip cleaning, a brass wire pad or a leather strop with a little polishing compound removes carbon without damaging the tip.

Pick transfer paper →

Worth adding after a few projects

A desktop fume extractor with a carbon filter is the first upgrade most people make, especially for burning indoors or for long sessions. Heat-resistant finger guards or a thin glove for the hand holding the work help on small pieces where your fingers are close to the tip. A replacement tip set or extra wire nibs in shapes you use often, such as a spoon shader or skew.

Stencils for lettering and repeat shapes, and a scorch marker or wood burning gel if you make signs with large, solid letters. For finishing, a clear water-based polyurethane or spray lacquer for decor pieces and a food-safe oil for spoons and boards.

Compare smoke extractors →

Upgrades for serious work

A professional wire-nib burner from Razertip, Colwood or Burnmaster costs 200 dollars or more but gives fast heat recovery, repeatable settings and pens that take tips from several brands. Extra pens let you keep a detail tip and a shader mounted at the same time, which saves constant tip swaps.

If you add color, colored pencils and watercolor pencils give controlled tint over a burn; thinned acrylic covers larger areas. A custom branding iron signs finished work in seconds if you sell pieces. A magnifier lamp helps with fine detail on portraits and wildlife.

Compare professional kits →

A sample starter list with budget

A realistic first order looks like this: a dial-controlled solid-point kit with around 20 tips (25 to 35 dollars), a pack of 10 to 20 basswood rounds or plaques (15 to 25 dollars), a pack of graphite transfer paper (8 to 12 dollars), assorted sandpaper (5 dollars) and needle-nose pliers if the kit does not include them. That is enough for a month of projects.

If you already know you want to do portraits or wildlife, swap the solid-point kit for a budget wire-nib station with 20 nibs (50 to 90 dollars). Add a fume extractor (30 to 60 dollars) once you burn more than an hour at a time. Hold off on coloring media, branding irons and pro burners until your projects call for them; buying everything at once usually means paying for things you never use.

What not to buy at the start

Skip 100-piece kits padded with stencils and stamp tips you will not use; a smaller kit with a good dial is better. Skip expensive exotic wood until you can burn basswood evenly. Do not buy a soldering iron as a substitute for a wood burner: soldering tips are plated and shaped for solder, and their temperature range is not set up for even burning.

Avoid buying a laser engraver if the goal is pyrography as an art. It burns wood, but the skill and the look are different from hand burning.

Wood burning tool vs soldering iron →

Frequently asked questions

How much does it cost to start pyrography? About 40 to 70 dollars for a dial-controlled kit, a pack of basswood blanks, sandpaper and transfer paper. A wire-nib setup brings it closer to 100 to 150 dollars.

Do I need a mask for pyrography? A fan or fume extractor that pulls smoke away is the main protection. A respirator is a good addition for long sessions or when burning leather.

What is the most important pyrography supply? A burner with reliable temperature control. Even heat makes every other supply work better.

Can I use regular pencils for pyrography designs? Yes. Soft graphite pencil lines burn over cleanly and erase afterwards, unlike ink or markers.

What you need for this