Gear guide
Best Wood Burning Stencils: Metal, Reusable and Letter Sets
Picked from Amazon listings, not hands-on tests. How we pick

A stencil lets you burn letters and shapes you cannot draw, but only if it suits the method. A hot wood burning pen needs metal: the stainless steel pyrography stencils listed here give thicknesses of 0.3 to 0.5 mm and sizes around 4 x 7 inches, small enough for spoons, tags and plaques. Plastic melts under a hot tip and gives off fumes, so PET stencils belong with the chemical route, where wood burning gel or paste is spread through the stencil and the stencil is lifted before the heat gun comes out, or with a pencil for tracing an outline to burn afterward. Beyond material, sets differ in piece count, stencil size and what is cut into them: alphabets and numbers, borders, florals or wildlife. This guide compares wood burning stencils on those points as each Amazon listing states them. No adhesive vinyl stencils appeared among the listings checked, so none are included. Nothing here was burned by us: fix the stencil so it cannot drift, start at low heat and test on scrap first.
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Top picks at a glance
Compare all picksClosest match for the job
Eageus metal letter stencils, 8 pieces, 4 x 7 in
Eight stencils of 4 x 7 inches covering uppercase letters, lowercase letters and numbers.
See price on AmazonSee it on AmazonMost for the money on paper
Wildlife Wood Burning Stencils, 6 in
Sixteen stencils of 6 x 6 inches with deer, eagle, wolf, moose, horse and tree designs.
See price on AmazonSee it on AmazonMost complete listing
Aleks Melnyk No.37 Celtic metal stencils, 3 pieces
Stainless steel, 4 x 7 inches (102 x 178 mm), 0.3 mm thick, sold as a reusable kit of 3.
See price on AmazonSee it on Amazon
Compare the picks
- Eageus metal letter stencils, 8 pieces, 4 x 7 in
- Material
- Stainless steel, 0.3 mm
- Pieces
- 8
- Size
- 4 x 7 in
- Designs
- Upper, lower case, numbers
- Aleks Melnyk No.37 Celtic metal stencils, 3 pieces
- Material
- Stainless steel, 0.3 mm
- Pieces
- 3
- Size
- 4 x 7 in (102 x 178 mm)
- Designs
- Celtic knots and borders
- Warpest metal flower stencils, 8 pieces, 4 x 7 in
- Material
- 304 stainless, 0.3 mm
- Pieces
- 8
- Size
- 4 x 7 in (102 x 178 mm)
- Designs
- Flowers, birds, leaves
- Wildlife Wood Burning Stencils, 6 in
- Material
- PET plastic, 0.25 mm
- Pieces
- 16
- Size
- 6 x 6 in
- Designs
- Forest wildlife scenes
- Lewtemi Metal Wood Burning Stencils, 6 Pcs
- Material
- Stainless steel
- Pieces
- 6
- Size
- 5 x 3 in (14 x 8 cm)
- Designs
- Letters, numbers, flowers
- BENECREAT alphabet number metal stencils, 4 pieces
- Material
- Stainless steel, 0.5 mm
- Pieces
- 4
- Size
- 7 x 4 in (17.7 x 10.1 cm)
- Designs
- Alphabets and numbers
- ZCPTZ large wildlife PET stencils, 10 pieces
- Material
- PET plastic, 0.25 mm
- Pieces
- 10
- Size
- Up to 13.7 x 13.7 in
- Designs
- Horse, deer, owl, fish
| Pick | Material | Pieces | Size | Designs | Price | Link |
|---|---|---|---|---|---|---|
| Eageus metal letter stencils, 8 pieces, 4 x 7 in | Stainless steel, 0.3 mm | 8 | 4 x 7 in | Upper, lower case, numbers | - | Amazon |
| Aleks Melnyk No.37 Celtic metal stencils, 3 pieces | Stainless steel, 0.3 mm | 3 | 4 x 7 in (102 x 178 mm) | Celtic knots and borders | - | Amazon |
| Warpest metal flower stencils, 8 pieces, 4 x 7 in | 304 stainless, 0.3 mm | 8 | 4 x 7 in (102 x 178 mm) | Flowers, birds, leaves | - | Amazon |
| Wildlife Wood Burning Stencils, 6 in | PET plastic, 0.25 mm | 16 | 6 x 6 in | Forest wildlife scenes | - | Amazon |
| Lewtemi Metal Wood Burning Stencils, 6 Pcs | Stainless steel | 6 | 5 x 3 in (14 x 8 cm) | Letters, numbers, flowers | - | Amazon |
| BENECREAT alphabet number metal stencils, 4 pieces | Stainless steel, 0.5 mm | 4 | 7 x 4 in (17.7 x 10.1 cm) | Alphabets and numbers | - | Amazon |
| ZCPTZ large wildlife PET stencils, 10 pieces | PET plastic, 0.25 mm | 10 | Up to 13.7 x 13.7 in | Horse, deer, owl, fish | - | Amazon |
Facts are taken from each Amazon listing. Prices are checked daily and shown with their date.
The picks in detail
Pick 1 · eageus
Eageus metal letter stencils, 8 pieces, 4 x 7 in
See price on AmazonEight 4 x 7 inch stainless steel stencils with uppercase letters, lowercase letters and numbers in several fonts. The lettering set for names and dates burned with a pen.
What the listing offers
- Eight stencils of 4 x 7 inches covering uppercase letters, lowercase letters and numbers.
- Stainless steel, laser cut, with a stated thickness of 0.3 mm.
- Listing names wood burning, leather burning, engraving and pyrography among the uses.
Limits to know
- Described as small letter stencils, but the listing gives no letter height for any font.
- The description covers letters and numbers; borders and pictures are not mentioned.
Pick 2 · Aleks Melnyk
Aleks Melnyk No.37 Celtic metal stencils, 3 pieces
See price on AmazonThree 4 x 7 inch stainless steel stencils of Celtic knot borders and Viking-style symbols. The listing names both a woodburning pen and scorch paste or burning gel with a heat gun.
What the listing offers
- Stainless steel, 4 x 7 inches (102 x 178 mm), 0.3 mm thick, sold as a reusable kit of 3.
- Listing names use with a woodburning pen, scorch paste, burning gel and a heat gun.
- Designs are Celtic knot borders and Scandinavian knotwork symbols rather than letters.
Limits to know
- Only three stencils in the kit, fewer than any other metal set in this guide.
- One theme only: no alphabet or numbers for names and dates.
Pick 3 · Warpest
Warpest metal flower stencils, 8 pieces, 4 x 7 in
See price on AmazonEight 4 x 7 inch stencils in 304 stainless steel with sunflowers, roses, tulips, butterflies, birds, leaves and vines. The decorative set for borders and motifs rather than lettering.
What the listing offers
- Eight stencils in 304 stainless steel, laser cut, with a stated thickness of 0.3 mm.
- Designs include sunflowers, roses, tulips, butterflies, birds, leaves and vines.
- Listing names pyrography on wood and leather alongside painting, carving and journaling.
Limits to know
- The title sells it as a painting stencil; pyrography appears only in the bullet points.
- No letters or numbers, so it cannot cover names and dates on its own.
Pick 4 · SUNVERSE
Wildlife Wood Burning Stencils, 6 in
See price on AmazonSixteen 6 x 6 inch PET stencils with deer, eagle, wolf, moose, horse, camping and tree designs. Plastic, so a set for gel, paste or marker work and for tracing, not for a hot pen tip.
What the listing offers
- Sixteen stencils of 6 x 6 inches with deer, eagle, wolf, moose, horse and tree designs.
- Semi-transparent PET, 0.25 mm thick, which the listing says makes alignment easy.
- Listing says they wash with soapy water and can be used many times.
Limits to know
- PET is plastic: the product page describes tracing, painting and spraying, not contact with a hot tip.
- No adhesive backing; the listing suggests a temporary adhesive to hold the stencil in place.
Pick 5 · Lewtemi
Lewtemi Metal Wood Burning Stencils, 6 Pcs
See price on AmazonSix pocket-size stainless steel stencils, about 5 x 3 inches each, with letters, numbers, symbols, flowers and geometric elements. Sized for small items such as tags, spoons and ornaments.
What the listing offers
- Six stainless steel stencils with letters, numbers, symbols, flowers and geometric elements.
- Each measures about 14 x 8 cm (5 x 3 inches), easy to hold on a small workpiece.
- Listing names pyrography, wood burning, leather burning and wood carving as uses.
Limits to know
- Smaller plates than the 4 x 7 inch sets, so each design and letter is smaller too.
- Metal thickness is not stated in the listing.
Pick 6 · BENECREAT
BENECREAT alphabet number metal stencils, 4 pieces
See price on AmazonFour 7 x 4 inch stainless steel stencils in four alphabet and number styles, 0.5 mm thick. A compact lettering set, though the listing itself advises against high temperature.
What the listing offers
- Four stainless steel stencils, each 7 x 4 inches and 0.5 mm thick, in four letter styles.
- Listing names wood carving and burning, leather burning, pyrography and engraving.
- Thicker plate than the 0.3 mm sets in this guide, going by the stated figures.
Limits to know
- The listing's own notice says not to use high temperature, given the thickness.
- The same notice warns the edges may show some abrasion, so handle with care.
Pick 7 · ZCPTZ
ZCPTZ large wildlife PET stencils, 10 pieces
See price on AmazonTen large PET stencils in four sizes up to 13.7 x 13.7 inches, with horse, turtle, fish, owl, deer, bear and mountain forest designs. Sized for signs and trays worked with gel or paste.
What the listing offers
- Ten designs in four sizes: 13.7 x 13.7, 13.7 x 11, 13.7 x 7.9 and 13.7 x 5.9 inches.
- PET, 0.25 mm thick, described as waterproof and rinsed clean with water after use.
- Clear material lets you see the wood underneath for placement, according to the listing.
Limits to know
- PET is plastic, and the spec sheet describes chalk, paint, ink and spray uses, not a hot pen.
- Too large for spoons, coasters and other small blanks; these are sign-size stencils.
Read before you buy
- How to Transfer a Photo Onto Wood: 3 Methods That WorkHow to transfer a photo onto wood with gel medium, graphite paper or a wood burner: which prints work, how to flip the image and how to seal it.
- Wood Burning Patterns for Beginners and How to Pick a TemplateWhich wood burning patterns and pyrography templates suit beginners, how to judge a pattern before you burn it, where to find them and how to size and transfer.
- Using a Wood Burning Pen on Felt Hats: Tools, Heat and TechniqueHow to use a wood burning pen on a felt hat: which felt sources accept or reject, the tips and heat to start with, chalk layout and a 9-step method.
- What Is Wood Burning Paste and Gel Made Of, and How Does It Work?What wood burning paste and gel are, what makers publish about the contents, how heat of about 350 F darkens the wood, and the stencil steps with a heat gun.
- How to Transfer a Pattern or Image to Wood for Wood BurningFour ways to put a pattern on wood for burning, compared in one table, with 7 steps for graphite paper and how to remove the lines at 220 to 320 grit.
More gear for the transfer the design stage
Burn and Grain chooses every product independently from what its Amazon listing states. We may earn a commission from the links above. As an Amazon Associate I earn from qualifying purchases.