# Best Wood Burning Branding Irons: Custom Logo Irons Compared

Source: https://burnandgrain.com/best/best-wood-burning-branding-iron
Publisher: Burn and Grain. Picks are chosen from what each Amazon listing states, not from hands-on tests. Method: https://burnandgrain.com/how-we-pick

A wood branding iron burns the same mark in two to five seconds every time, which is why furniture makers, turners and sign shops use one to sign their work. The stamp is almost always brass, engraved 2 to 3.5 mm deep from your logo, and it screws onto either an electric handle or a plain rod you heat in a flame. Electric irons hold temperature from one piece to the next and many have a dial, which matters because softwood scorches at a lower heat than oak or maple. Flame irons cost less but cool as you work. The other choice is size: a 1 in stamp suits small boxes and cutting boards, while 2 to 3 in stamps need a higher-wattage handle to heat evenly. This guide compares seven custom irons by what each listing states.

## Picks

### 1. Custom Electric Branding Iron For Wood & Leather Personalized Burger Stamps For Food Black Temperature-Controlled Heat Woodburning Tool For Woodworking Diy Craft

Custom brass logo stamp on a temperature-controlled electric handle, M8 screw, engraving 2.5 to 3.5 mm deep, heats in 3 to 5 minutes.

What the listing offers:
- Listing states engraving depth, stamp thickness and M8 thread, so you know what you are getting
- Short stated heat-up time of 3 to 5 minutes
- Stamps are interchangeable on the handle, so you can add a second design later

Limits to know:
- Handle wattage is not stated in the listing
- Custom order: lead time and logo detail depend on the artwork you upload

### 2. Custom Electric Branding Iron For Wood, Adjustable Temperature Electric Personalized Burger Stamps for Food, Customized Logo Branding Iron for Leather Weddings

Custom brass stamp on a 300 W temperature-controlled electric handle, seven sizes from 1 to 4 in, heats in 5 to 8 minutes.

What the listing offers:
- 300 W handle is stated, enough for larger stamps
- Seven sizes up to 4 in, the widest range here
- Adjustable temperature for different woods and leather

Limits to know:
- A 4 in stamp on 300 W may need longer to heat evenly than the listing suggests
- Listing gives no engraving depth or stamp thickness

### 3. Custom Electric Branding Iron for Wood, Custom Wood Branding Iron

Custom brass branding iron with a built-in dial from 200 to 500 C, sizes 1 to 4 in, straight or curved handle.

What the listing offers:
- Stated temperature range of 200 to 500 C on the dial
- Seven stamp sizes from 1 to 4 in and two handle shapes
- Dial lets you lower heat for softwood such as pine and raise it for oak

Limits to know:
- Highest price among the custom electric irons here
- Handle wattage and heat-up time are not stated

### 4. Custom Electric Branding Iron for Wood, Wood Branding Iron Personalized

Custom brass branding stamp in 1 to 3 in sizes on a temperature-controlled electric handle, bent or straight, heated 8 to 10 minutes.

What the listing offers:
- Choice of bent or straight handle, bent is easier on flat panels
- Five stamp sizes from 1 to 3 in, in half-inch steps
- Text can be added to an uploaded logo or a stock design

Limits to know:
- Listing suggests unplugging and branding on residual heat, so heat drops over a batch
- Longer stated heat-up time than most irons here

### 5. 300W Electric Branding Iron for Wood Leather Food M8 Thread HeatStamp Tool

Electric branding iron handle with M8 thread, sold with a wire brush, metal stand and gloves; a custom stamp is ordered separately.

What the listing offers:
- M8 thread matches many custom brass stamps sold separately
- Stand, wire brush and gloves are included
- Good choice if you already own a stamp or want several designs on one handle

Limits to know:
- Listing title says 300 W and the bullets say 350 W, the rating is unclear
- Stated 10 to 15 minute heat-up is the slowest here

### 6. KAINSY Custom Branding Iron for Wood, Durable Personalized Logo Metal Branding Iron for Wood Burning Stamp Leather Meat, Handcrafted Design Weddings & Personalized Gifts, Flame Heated(1 inch)

Flame-heated custom brass branding iron on an 11.2 in wooden handle, sizes 1 to 4 in, heated over a fire for 2 to 3 minutes.

What the listing offers:
- No cord, so it works at a campfire, market stall or outdoor bench
- Stated heat time of 2 to 3 minutes over a flame
- Low price for a custom brass stamp in sizes up to 4 in

Limits to know:
- No temperature control, results vary with flame and timing
- Heat drops after a few brands, so batches need reheating

### 7. Custom Logo Wood Branding Iron, Custom Reliable Leather Branding Iron Stamp,Wood Branding Iron/Wedding Gift,Handcrafted by Design (1"x1")

Flame-heated custom brass branding iron with a long handle, 1 x 1 in stamp with stock designs plus your initials and date.

What the listing offers:
- Cheapest way to get a custom mark on small pieces
- Stock designs with initials and dates suit wedding and gift pieces
- Long handle keeps your hand away from the flame

Limits to know:
- 1 x 1 in size is small for signs and large panels
- Flame heating gives no control over temperature

As an Amazon Associate I earn from qualifying purchases.