# Best Wood Blanks for Pyrography: Rounds, Plaques and Ornaments

Source: https://burnandgrain.com/best/best-wood-blanks-for-pyrography
Updated: 2026-10-21
Publisher: Burn and Grain. Picks are chosen from what each Amazon listing states, not from hands-on tests. Method: https://burnandgrain.com/how-we-pick

A burn is only as clean as the wood under it. Pale, soft, even-grained wood shows the line of a wood burning pen best, which is why basswood is the standard choice for pyrography blanks. Pine slices are common too, but pine has soft and hard bands and resin, so it burns less evenly. Beyond species, packs differ in shape (bark-edged rounds, routed plaques, thin sheets, drilled ornament slices), in thickness, in how many pieces you get, and in whether the surface arrives sanded. Buy bare, unfinished wood only: never burn pieces that are painted, stained, varnished or sealed, or MDF. This guide compares seven packs of wood burning blanks by the species, size, thickness and count their listings state. Where a listing leaves one out, the table says not stated. Nothing here was tested by us. Even a pre-sanded pyrography blank is worth a light pass with 220 to 320 grit, with the grain, before you start.

## Picks

### 1. Foggy Bottom Woodworks LLC Basswood Rectangle Plaque, 5-Pack

Wood: Basswood; Size: 10 x 8 in; Thickness: 0.71 in; Count: 5

Five rectangular basswood plaques, each 10 x 8 x 0.71 in, with a routed edge and a sanded surface. A flat, bark-free panel for signs and larger pyrography pieces.

What the listing offers:
- The species is stated: a pack of five basswood plaques, made in the USA.
- Exact dimensions are given for each piece: 10 in x 8 in x 0.71 in.
- Routed edge and sanded surface, and the listing names woodburning, laser engraving and painting.

Limits to know:
- Only 5 pieces per pack, so it is a small pack for practice burns.
- Sold under a Generic brand label with a short listing, and the sanding grit is not stated.

### 2. Wilson 4 Pack Basswood Round Rustic Wood Slice, Sanded Side, 9-12" Diameter, Excellent for Wedding Centerpiece, DIY Woodland Projects, Table Chargers, Pyrography, and Country Decor

Wood: Basswood; Size: 9-12 in diameter; Thickness: About 1 in; Count: 4

Four kiln-dried basswood rounds with bark, 9 to 12 in across and about 1 in thick, each sanded on one side. Large rustic slices for signs and centerpiece-size burns.

What the listing offers:
- Basswood rounds 9 to 12 in in diameter and about 1 in thick, with the bark left on.
- Each round comes sanded on one side and is kiln dried, per the listing.
- Made in the USA in the Upper Peninsula of Michigan, and wood burning is named among the uses.

Limits to know:
- Only one side is sanded, and the spec sheet says pieces vary in size and surface clarity.
- Four large pieces is a small pack, and the diameter of each round can fall anywhere from 9 to 12 in.

### 3. MineIdea 12 Pack Unfinished Gothic Arch Wood Plaque, 5” x 7” Basswood Shield Plaque Unfinished Wooden Arch Crafts DIY Gothic Wood Surface for Woodburning DIY Project Crafts

Twelve arch-shaped basswood plaques, each 5 x 7 inches, listed as suitable for wood burning. A small-format blank set for practicing designs or making signs and gifts.

What the listing offers:
- Basswood is described as smooth and splinter-free with a fine, light grain, a surface that suits wood burning and engraving.
- Twelve plaques in one set give plenty of blanks for practice pieces, gifts or a batch of matching signs.
- Each plaque is 5 x 7 inches with uniform dimensions, a manageable size for small to medium burning projects.

Limits to know:
- The arch shape is fixed, so it will not suit projects that need a square or rectangular layout.
- Sold only as a 12 pack, which is more blanks than a one-off project needs; the listing gives no thickness.

### 4. 6 Pack 13 Inch Oval Wood Slice Basswood Plaque Hanging Signs for Burning Painting Crafts

Wood: Basswood; Size: 12-14 x 4.7-5.5 in; Thickness: 0.42 in; Count: 6

Six unfinished basswood oval slices with jute for hanging, about 12 to 14 in long, 4.7 to 5.5 in wide and 0.42 in thick. Long, narrow blanks for name and welcome signs.

What the listing offers:
- Six unfinished basswood oval signs, with jute included for hanging.
- Dimensions are stated: 12 to 14 in by 4.7 to 5.5 in, with a sign thickness of 0.42 in.
- The material is given simply as basswood, and wood burning is named among the uses.

Limits to know:
- Sizes vary from piece to piece, and the listing warns of natural markings and blemishes.
- The listing does not say the surface is sanded, so expect to sand before burning.

### 5. 24 Pack 12"x12"Basswood Sheets 1/8",3mm Basswood for Laser Cutting,3mm Plywood Unfinished Wood Craft Wood for DIY Ornaments and Models Drawing Painting Engraving Wood Burning and Laser Cutting

Wood: Basswood plywood; Size: 12 x 12 in; Thickness: 1/8 in (3 mm); Count: 24

Twenty-four thin basswood plywood sheets, 12 x 12 in and 1/8 in thick. A large stock of flat surface to practice on or cut into ornaments; on plywood, burn only the face veneer.

What the listing offers:
- 24 sheets per pack, each 12 x 12 in and 1/8 in (3 mm) thick.
- The listing describes a flat, smooth surface without burrs and an even wood grain.
- Wood burning is named among the uses, along with laser cutting, scroll sawing and scale models.

Limits to know:
- This is plywood, not solid basswood: burn only the face veneer and never down into the glue.
- Thin 1/8 in sheets suit ornaments and practice rather than plaques meant to stand or hang on their own.

### 6. SENMUT Wood Slices 3.5-4.0 Inch Natural Rounds Unfinished Wooden Circles

Wood: Pine; Size: 3.5-4.0 in diameter; Thickness: About 0.4 in; Count: 30

Thirty natural pine rounds with bark, about 3.5 to 4.0 in across and 0.4 in thick, each pre-drilled with a hole and packed with jute twine. Ready-made blanks for wood burning ornaments and tags.

What the listing offers:
- 30 slices, each pre-drilled with a hole, plus jute twine and cotton rope for hanging.
- The listing says each circle is polished smooth and only cut, sanded and dried, with no other treatment.
- Stated size: diameter about 3.5 to 4.0 in, thickness about 0.4 in.

Limits to know:
- Pine has soft and hard bands and resin, so it burns less evenly than basswood.
- The listing warns that some bark may fall off and that slices can crack in heat or humidity.

### 7. Creative Hobbies® Unfinished Wood Plaques, 6.5 Inch x 4.5 Inch, 4 Assorted Shapes

Wood: not stated; Size: 6.5 x 4.5 in; Thickness: 1/4 in; Count: 4

Four smooth unfinished wooden plaques in assorted shapes with beveled edges, each 6.5 x 4.5 in and 1/4 in thick. A small sampler for trying a first design, though the wood species is not named.

What the listing offers:
- Four plaques measuring 6.5 in by 4.5 in by 1/4 in thick, in 4 assorted shapes.
- Described as smooth and unfinished with beveled edges, ready to be customized.
- Wood burning is the first craft the listing names for these plaques.

Limits to know:
- The wood species is not stated, so how pale or evenly it burns cannot be judged from the spec sheet.
- Only 4 pieces, and at 1/4 in they are thinner than the basswood plaques on this page.

As an Amazon Associate I earn from qualifying purchases.